A mountain bike is a bicycle that is designed specifically for mountain biking, either on dirt trails or on other unpaved environments. Mountain bikes are different from regular bikes in a number of ways.
First, they have wide and knobby tires for extra traction and shock absorption.
Also, most mountain bikes are fitted with bar ends on the handlebars. However, with the increase in the popularity of riser handlebars, fewer riders now tend to use bar end extensions.
There are basically four different classifications of mountain bikes.
1. Fully rigid- Fully rigid mountain bikes have a frame which has a rigid fork and fixed rear with no suspension.
2. Hard tail- Hard tail mountain bikes have a frame with no rear suspension, and these bikes are usually used with front suspension.
3. Soft tail- Soft tail mountain bikes have a frame with a small amount of rear suspension, but activated by the flex of the frame instead of by the pivots.
4. Dual or full suspension- Dual or full suspension mountain bikes have a frame with a front suspension fork and rear suspension with a rear shock and linkage that makes the rear wheel move on pivots.
Mountain Bike Disc Brakes
There are many key components on the typical mountain bike. One of the most critical components of a mountain bike is the mountain bike disc brakes. Mountain bike disc brakes are featured on most new mountain bike models. Mountain bike disc brakes offer much improved stopping power over the previously used rim brakes.
Mountain bike disc brakes also work much better under adverse conditions. This is because they are located at the center of the wheel. Unlike rim brakes, they remain drier and cleaner than other rims. Although there are many advantages to mountain bike disc brakes, there are some disadvantages as well. They tend to weigh more and are often more expensive as well.
Maintenance on disc brakes also tends to be more difficult and costly. This is especially true of hydraulic disc brakes, which work by moving brake fluid through a hose or line to squeeze the pads together.
It is very important to make sure that your brakes are in as proper working condition. This means you need to take your bike in to your local bike shop and get a full inspection at least once a month. This will not only ensure that your brakes and the rest of the parts on your bike last as long as they possibly can, but more importantly that you can feel safe riding on a bike that you know is safe and secure and which will be able to properly handle those rugged and steep hills.